Nokia 9000il Owner's Manual

Contents

Nokia 9000il Owner's Manual Manual pdf 88 page image

10-8 Install/Remove softwareÖ Press Open to open the folder containing thefile(s) you want to transfer.Select a file by moving the selection frameover it. If the file you want is in a differentfolder, press Close and select another folder.If you want to copy more than one file, usemulti-selection (Ctrl+space bar) or repeat theprocedure from step 1.Ü Press Copy to PC to start file transfer.Before files can be copied to a PC, you mustchange the name of the copied file to a PC com-patible format. The File transfer application willsuggest a name, but you can also enter it your-self. The name may contain eight characters andthe extension three characters.Transferring files to thecommunicatorAfter the connection type and PC drive havebeen selected in the settings:Å Press the left arrow key to activate the com-municator window.Ç Select the correct destination folder andpress Open.É Press Change window to activate the PCwindow.Ñ Press Open to open the directory containingthe file(s) you want to transfer. The windowshows the subdirectories and then the files inalphabetical order. Open a subdirectory, ifnecessary, then select the file by moving theselection frame over it.Ö Press Copy from PC to start the file transfer.If you want to copy more files, repeat theprocedure from step 1.To terminate the connection to the PC, pressDisconnect.Install/Remove softwareThe Install/Remove software application enablesyou to install communicator software from a PCand to remove the software from the communi-cator later.The Install/Remove software main view displaysthe serial connection type and the PC drive used.Press Settings to change the connection type orto redefine the PC drive used. The connection typeis changed by pressing Change. The directoryname and path can be edited manually.Before using this application, make sure that theconnectivity software (Nserver) has been in-stalled on your PC (see ”Connecting to a PC” onpage 10-6).To install software:Å Start the Nserver software.Ç Press Install in the Install/Remove softwareview. The communicator starts to search forsoftware to install from the designated PCdrive. If installable software is found, it willbe listed on the screen.É Select the software you want to install withthe selection frame and press Install.When installation is complete, the confirmationnote tells you under which application buttonthe software was installed (destination cannotbe selected). If an application already existswhich has the same name as the software to beinstalled, you will be asked to confirm the re-placement operation by pressing Replace or tocancel it with Cancel.To remove software:Å Press Remove to search for removable soft-ware on the communicator. The amount offree space on your communicator is alsodisplayed.Ç Select the software you want to remove andpress Remove.Note: The set of applications which are on thecommunicator at the time of purchasecannot be removed.