length indicator also shows theelapsed and remaining time.10 The location to which the video issaved11 GPS signal indicatorAfter recording a video clipAfter you record a video clip, select fromthe following options (available only ifyou have selected Options > Settings >Show last captured video > Yes):Play — Play the video clip you justrecorded.— Upload the image to a compatibleonline album.Delete — Delete the video clip.To return to the viewfinder to record anew video clip, press the capture key.Camera settingsStill image camera settingsSelect Menu > Applications > Camera.To change the main settings, in imagemode, select Options > Settings andfrom the following:Image quality — Set the resolution. Thehigher the image resolution, the morememory the image consumes.Show captured image — View theimage after it is captured, or continueimage capturing immediately.Default image name — Define thedefault name for captured images.Capture tone — Set the tone that soundswhen you capture an image.Memory in use — Select where to storeyour images.Show GPS info — To add GPS locationcoordinates to each image file, select On.Receiving a GPS signal may take time, orthe signal may not be available.Auto-rotate images — Select whetheryou want images that are captured whenthe device is held upright to be rotatedwhen you open them in Photos.Restore camera settings — Restore thecamera settings to the default values.Video settingsSelect Menu > Applications > Camera.To edit the main settings, in video mode,select Options > Settings and from thefollowing:Video quality — Set the quality of thevideo. To send a video in a multimediamessage, select Sharing quality. The clipis recorded in QCIF resolution, in the 3GPPfile format. You may not be able to sendvideos saved in the MPEG4 file format in amultimedia message.Show GPS info — To automatically addGPS location coordinates to videos, selectOn. Receiving the GPS signal may taketime, or the signal may not be available.Location information can be attached toan image or a video if location coordinatescan be determined via network and GPS.If you share an image or a video which haslocation information attached, thelocation information is visible to othersthat view the image or the video. You candeactivate geotagging in the camerasettings.Audio recording — Record sound.Show last captured video — View thefirst frame of the recorded video after therecording stops. To view the entire video,select Play .Default video name — Enter the defaultname for recorded videos.Memory in use — Select where to storeyour videos.Restore camera settings — Restore thecamera settings to the default values.© 2010 Nokia. All rights reserved. 71