Function keyTo enter a character or function marked with color, press the function key, so that is shown on the display, then the key youwant.To enter only characters marked with color, press the function key twice so that is shown on the display, then the charactersyou want.To activate Bluetooth, press the function key and Ctrl key simultaneously. To deactivate Bluetooth, press the function key andCtrl key again.To activate infrared, press the function key and Chr key simultaneously.Menu keyLeaving applications running in the background increases the demand on battery power and reduces the battery life. To accessthe applications in your device, press the menu key in the standby modes. To return to Menu from an application, leaving theapplication open in the background, press the menu key. Press and hold the menu key to see a list of the active applicationsand switch between them. In this user guide, "select Menu" refers to pressing this key.Contacts keyTo access the Contacts directory from any application, press the contacts key.Voice keyPress the voice key to open Recorder. Press and hold the voice key to use voice commands. See "Voice commands," p. 41.CameraYou can take photos or record video clips with the built-in camera. The camera lens is on the back of the device, and the displayworks as a viewfinder.To take a picture, select Menu > Media > Camera. Use the display as a viewfinder, aim at your subject,and press the scroll key. The device saves the photo in the default folder, or in the folder you havedefined.Lock the keysWhen the keyguard is on, calls may be possible to the official emergency number programmed into your device.Lock the keys to prevent accidental keypresses.To lock the keys in the standby mode, press the left selection key (1) and the function key (2). Tounlock, press the left selection key and the function key again.Tip: To lock the keys in the Menu or in an open application, press the power key briefly,and select Lock keypad. To unlock, press the left selection key and the function key.When the device is locked, calls may be possible to the official emergency number programmedinto your device. You can also lock the device in the standby mode using your lock code. Press thepower key, select Lock phone, and enter your lock code. The default lock code is 12345. To unlock,press the left selection key, enter your lock code, and press the scroll key.ConnectorsWarning: When you use the headset, your ability to hear outside sounds may be affected. Do not use the headsetwhere it can endanger your safety.Pop-Port™ connector for headset and otherenhancementsG e t s t a r t e d© 2007 Nokia. All rights reserved. 12
