Nokia E62 User Manual

Contents

Nokia E62 User Manual Manual pdf 65 page image

You can use the Data transfer without installing the USB data cable drivers.Select Menu > Settings > Data cbl..Using a USB data cable, you can connect your device to a compatible PC. Connect the USB data cable to the bottom of the device.To change the device type you normally connect to your device with the data cable, press the joystick.Select from the following:• Ask on connection — Select whether you want to be asked for the device type every time you connect the data cable to yourdevice.• PC Suite — Connect the PC Suite to your device with the data cable, and use your device as a modem.• Data transfer — Access and transfer data such as music or image files from your computer using the data cable connection.To use the Data transfer mode, make sure that you have not selected USB as a connection type in the Manage connectionssettings in Nokia PC Suite. Insert a memory card to your device, connect the device to a compatible computer with the USBdata cable, and select Data transfer when the device asks which mode is used. In this mode, your device acts as a mass storagedevice and you can see it as a removable hard drive in your computer. The device will switch into the Offline profile if this isselected. End the connection from the PC (for example, from an Unplug or Eject Hardware wizard in Windows) to avoiddamaging the memory card. After you end the connection, the device returns to the profile in which it was before using thedata transfer mode.To save your selection, select Back.Connection managerSelect Menu > Settings > Conn. mgr..To view the status of data connections or end connections, select Act. data conn..View and end active connectionsNote: The actual time invoiced for calls by your service provider may vary, depending on network features, roundingoff for billing, and so forth.In the active connections view, you can see the open data connections: data calls and packet data connections.To view detailed information about network connections, select the connection from the list and Options > Details. The type ofinformation shown depends on the connection type.To end a network connection, select the connection from the list and Options > Disconnect.To end all active network connections simultaneously, select Options > Disconnect all.To view the details of a network, press the joystick.ModemSelect Menu > Settings > Modem.Together with a compatible computer, you can use your device as a modem to connect to the Web.Before you can use your device as a modem• You must subscribe to the appropriate network services from your service provider or Internet service provider.• You need a compatible computer with a USB data cable, Bluetooth, or infrared connectivity.• You must have Nokia PC Suite installed on your computer.• You must have the appropriate drivers installed on your computer. You may need to install or update drivers for your cable,Bluetooth, or infrared connection. After you have installed Nokia PC Suite, follow the instructions on the computer display toinstall the drivers and connect your device to the computer.After you have installed Nokia PC Suite and the appropriate drivers, start Nokia PC Suite on your computer. Select Connect to theInternet, and follow the instructions on the computer display.You may not be able to use some of the other communication features when the device is used as a modem.Device managementManage data and software on your device.Server profile settingsSelect Menu > Settings > Dev. mgr..To create a server profile, select Options > New server profile and select from the following options:• Server name — Enter a name for the configuration server.C o n n e c t i v i t yCopyright © 2006 Nokia. All Rights Reserved. 64