FCC DRAFTGet started (part 2)Charge the battery1. Connect the charger to a wall outlet.2. Connect the charger to the bottom of the device. If youhave a battery charger adapter, connect the chargerto the adapter, and the adapter to the bottom of thedevice.3. Connect the power cord to the battery chargeradapter. The battery indicator bar starts scrolling onthe display. If the battery is completely discharged, itmay take a few minutes before the charging indicatoris shown. The device can be used while charging.4. When the battery is fully charged, the bar stopsscrolling. Disconnect the charger from the device, thenfrom the outlet.When the battery charge level is too low for operation,the device switches itself off.Enter basic settingsWhen you power on the device for the first time, andwhen you power on the device after the battery has beenempty or removed for a longer period of time, your deviceasks for the city in which you are located, time, and date.You can change the settings later.1. Select your location from the list and press OK. Tobrowse for a city, type or scroll to the city name. It isimportant to select the correct city, because yourcalendar entries can change if the new city is locatedin a different time zone.2. Set the time, and select OK.3. Set the date, and select OK.CD-ROMThe sales package CD-ROM is compatible with Windows98SE, Windows ME, Windows 2000, and Windows XP.You can install Nokia PC Suite from the CD-ROM. Nokia PCSuite can be used only with Windows 2000 and WindowsXP.Nokia support and contactinformationCheck www.nokia.com/support or your local Nokia Website for the latest version of this guide, additionalinformation, downloads, and services related to yourNokia product.On the Web site, you can get information on the use ofNokia products and services. If you need to contactcustomer service, check the list of local Nokia contactcenters at www.nokia.com/customerservice.For maintenance services, check your nearest Nokiaservice center at www.nokia.com/repair.12 Get started (part 2)