Nokia E62 User Manual

Also see for E62: User guide User guide Supplementary guide Printing guide Configuring

Contents

Nokia E62 User Manual Manual pdf 72 page image

FCC DRAFT2. Select the device with which you want to pair, andenter the passcode. The same passcode must beentered to the other device as well.3. Select Yes to make the connection between yourdevice and the other device automatic or No toconfirm the connection manually every time aconnection attempt is made. After pairing, the deviceis saved to the paired devices page.To give a nickname to a paired device that is onlydisplayed in your device, scroll to the device with whichyou have paired, and select Options > Assign short name.To delete a pairing, select the device whose pairing youwant to delete and Options > Delete. To delete allpairings, select Options > Delete all.Tip: If you are currently connected to a device andcancel the pairing with that device, pairing isremoved immediately, and the connection isswitched off.Authorize a deviceIf you trust a paired device, you can allow it to connectautomatically to your device. You can select from thefollowing options:• Set as authorized — Connections between your deviceand the other device can be made without yourknowledge. No separate acceptance or authorizationis needed. Use this status for your own devices, suchas your compatible headset or PC, or devices thatbelong to someone you trust.• Set as unauthorized — Connection requests from theother device must be accepted separately every time.Receive dataIf you want to receive data using Bluetooth, selectBluetooth > On and My phone's visibility > Shown toall. When you receive data through Bluetoothconnectivity, a tone sounds, and you are asked if you wantto accept the message. If you accept, the message isplaced in the Inbox folder in Messag.Tip: You can access the files in the device or onthe memory card using a compatible accessorythat supports the File Transfer Profile Clientservice (for example, a laptop computer).Cable connectionInstall the USB data cable driver to your PC before you usea cable connection. You can use the Data transfer withoutinstalling the USB data cable drivers.Select Menu > Connect. > Data cbl..Using a USB data cable, you can connect your device to acompatible PC . Connect the USB data cable to the bottomof the device.To change the device type you normally connect to yourdevice with the data cable, press the joystick.Select from the following:• Ask on connection — Select whether you want to beasked for the device type every time you connect thedata cable to your device.• PC Suite — Connect the PC Suite to your device with thedata cable, and use your device as a modem.• Data transfer — Access and transfer data such as musicor image files from your computer using the data cable72 Connectivity