To edit the PIN codes for the security module, select ModulePIN to edit the PIN code for the security module or SigningPIN to edit the PIN code for digital signatures. You may notbe able to change these codes for all security modules.The key store contains the contents of the security module.To delete the key store, select Key store, select the desiredkey store, and Options > Delete. You may not be able todelete the key store of all security modules.Back up dataIt is recommended to back up device memory regularly to thememory card or a compatible computer.To back up information from the device memory to a memorycard, select Menu > Tools > Memory > Options > Backup phone memory.To restore information from the memory card to the devicememory, select Menu > Tools > Memory > Options >Restore from card.You can also connect your device to a compatible computerand use Nokia PC Suite to back up data.Remote configurationSelect Menu > Tools > Device mgr..With Device manager, you can manage settings, data, andsoftware on your device remotely.You can connect to a server, and receive configurationsettings for your device. You may receive server profiles anddifferent configuration settings from your service providersor company information management department.Configuration settings may include connection and othersettings used by different applications in your device. Theavailable options may vary.The remote configuration connection is usually started by theserver when the device settings need to be updated.To create a new server profile, select Options > New serverprofile.You may receive these settings from your service provider ina configuration message. If not, define the following:• Server name — Enter a name for the configurationserver.• Server ID — Enter the unique ID to identify theconfiguration server.• Server password — Enter a password to identify yourdevice to the server.• Session mode — Select the preferred connection type.• Access point — Select the access point to use for theconnection, or create a new access point. You can alsochoose to be asked for the access point every time youstart a connection. This setting is available only if you haveselected Internet as the bearer type.• Host address — Enter the web address of theconfiguration server.• Port — Enter the port number of the server.• User name — Enter your user ID for the configurationserver.Security and data management© 2008 Nokia. All rights reserved.116
