Call settingsTo display your phone number to the person you are calling,select Call > Send my caller ID > Yes. To let the networkdetermine whether your caller ID is sent, select Set bynetwork.To display your net call address to the person you are callingusing a net call, select Call > Send my internet call ID >Yes.To be notified of a new incoming call while you have a call inprogress, select Call > Call waiting > Options >Activate. To check if the function is active on the network,select Options > Check status.To select whether net calls alert or not, select Call > Internetcall alert. You are notified of missed net calls with anotification.To set the default call type, select Call > Default call typeand select Voice call if you make a GSM calls, or Internetcall if you make net calls.To send a text message automatically to the person who iscalling you informing why you cannot answer the incomingcall, select Call > Reject call with SMS > Yes. To set the textfor the message, select Call > Message text.To set off the contact search on the home screen, select Call >Contact search > Off.Network settingsSelect Menu > Tools > Settings > Phone > Network.To select the network mode, select Network mode and Dualmode, UMTS, or GSM. In the dual mode, the device switchesautomatically between networks.Tip: UMTS enables faster data transfer, but mayincrease the demand on battery power and reduce thebattery life. In regions close to both GSM and UMTSnetworks, selecting Dual mode may cause constantjumping between the two networks, which alsoincreases the demand on battery power.To select the operator, select Operator selection andManual to choose from available networks, or Automatic tohave the device select the network automatically.To set the device to indicate when it is used in Micro CellularNetwork (MCN), select Cell info display > On.Connection settingsSelect Menu > Tools > Settings > Connection.Select from the following:• Bluetooth — Edit the Bluetooth settings. See "Send andreceive data with Bluetooth", p. 105.• USB — Edit the data cable settings. See "Datacable", p. 104.• Access points — Set up new or edit existing access points.Some or all access points may be preset for your device bySettings© 2008 Nokia. All rights reserved. 127
