Using Secure HotSpotChapter 12: Setting Your Security Policy 251Resetting 802.1x LockingWhen 802.1x port-based security is configured for a LAN port, the first host that attempts to connect to thisport is ―locked‖ to the port. In order to connect a different computer to the port, you must first reset 802.1xlocking.To reset 802.1x locking on all ports1. Click Network in the main menu, and click the Ports tab.The Ports page appears.2. Click Reset 802.1x.A confirmation message appears.3. Click OK.The 802.1x status of all ports is reset to "Unauthenticated".Using Secure HotSpotYou can enable your IP60 appliance as a public Internet access hotspot for specific networks. When userson those networks attempt to access the Internet, they are automatically re-directed to the My HotSpot pagehttp://my.hotspot.Note: You can configure Secure HotSpot to use HTTPS. In this case, the MyHotSpot page will be https://my.hotspot.On this page, users must read and accept the My HotSpot terms of use, and if My HotSpot is configured tobe password-protected, they must log on using their Nokia IP60 username and password. The users maythen access the Internet or other corporate networks.Users can also log out in the My HotSpot page.
