Configuring RADIUS Attributes408 Nokia IP60 Security Appliance User GuideIn this field… Do this…Remote DesktopAccessSelect this option to allow all users authenticated by the RADIUSserver to log on to the my.firewall portal, view the Active Computerspage, and remotely access computers' desktops, using the RemoteDesktop feature.Note: Authenticated users can perform these actions, even if their levelof administrative access is "No Access".For information on Remote Desktop, see Using Remote Desktop onpage 411.Configuring RADIUS AttributesTo define a timeout for Secure HotSpot sessionsSet the Session-Timeout Attribute (attribute 27) to the number of seconds after which usersshould be automatically logged off from the hotspot.To assign permissions to specific RADIUS-authenticated users1. Create a remote access policy as follows:a) Assign the policy’s VSA (attribute 26) the SofaWare vendor code (6983).b) For each permission you want to grant, configure the relevant attribute of the VSA with thedesired value, as described in the following table.For example, to assign the user VPN access permissions, set attribute number 2 to ―true‖.2. Assign the policy to the desired user or user group.For detailed instructions and examples, refer to the "Configuring the RADIUS Vendor-Specific Attribute"white paper.
