Nokia N70 User Manual

Also see for N70 Music Edition: Specification sheet Installation guide User guide Get started Additional applications

Contents

Copyright © 2006 Nokia. All rights reserved.Contacts (Phonebook)31To restrict calls from your device to selected phonenumbers, select Options > Activ. fixed dialling. To addnew numbers to the fixed dialling list, select Options >New SIM contact. You need the PIN2 code for thesefunctions.When you use Fixed dialling, packet data connections arenot possible, except when sending text messages over apacket data connection. In this case, the message centrenumber and the recipient’s phone number must beincluded on the fixed dialling list.When fixed dialing is activated, calls may be possible tothe official emergency number programmed into yourdevice.Add ringing tones for contactsWhen a contact or group member calls you, the deviceplays the chosen ringing tone (if the caller’s telephonenumber is sent with the call and your device recognises it).1 Press to open a contact card, or go to the groupslist, and select a contact group.2 Select Options > Ringing tone. A list of ringing tonesopens.3 Select the ringing tone you wish to use for theindividual contact or the selected group.To remove the ringing tone, select Default tone from thelist of ringing tones.Create contact groups1 In Contacts, press to open the groups list.2 Select Options > New group.3 Write a name for the group or use the default nameGroup, and select OK.4 Open the group, and select Options > Add members.5 Scroll to a contact, and press to mark it. To addmultiple members at a time, repeat this action on allthe contacts you want to add.6 Select OK to add the contacts to the group.To rename a group, select Options > Rename, enter thenew name, and select OK.Remove members from a group1 In the groups list, open the group you want to modify.2 Scroll to the contact, and select Options > Removefrom group.3 Select Yes to remove the contact from the group.Tip! To check to which groups a contact belongs,scroll to the contact, and select Options > Belongsto groups.