Camera Take time-lapse picturesSelect Options > Advanced sequence to set the camerato take several pictures in a sequence automatically. Youcan set the rate between two frames per second (fast) andone frame every 15 minutes (slow). The number ofpictures is limited by the amount of memory available.The pictures are automatically saved in Gallery.You can also use thesequence mode with the Selftimer. See "You in thepicture — self-timer", onpage 12.After taking the pictures,they are shown in a grid onthe main display. To view apicture, press to open it.To return to the sequenceself-timer, select Activate. The self-timer indicator ( )blinks and the device beeps when the timer is running. Thecamera takes the picture after the selected delay haselapsed. You can also use the Self timerin the sequencemode. See "Take time-lapse pictures", on page 12.Camera settingsTo change the main camera settings, select Options >Settings, and from the following:Image quality — Print (1600x1200 resolution), E-mail(1024x768 resolution) or MMS (640x480 resolution). Thebetter the image quality, the more memory the image uses.Add to album — Select whether you want to save theimage to a certain album in Gallery. If you select Yes, a listof available albums opens.Extended zoom — Select On if you want to achievemaximum zoom but are prepared to accept a reduction in9243184_N71-1_en_apac.book Page 12 Friday, May 26, 2006 2:31 PM
