ConnectivityBluetooth connectivity indicators• When is shown in the standby mode, Bluetoothconnectivity is on.• When is blinking, your device is trying to connectwith another device.• When is shown continuously, data is beingtransmitted.Tip! To send text, open Notes, write the text, andselect Options > Send > Via Bluetooth.1 Open the application where the item you want to sendis stored. For example, to send an image to anothercompatible device, open Gallery.2 Select the item and Options > Send > Via Bluetooth.Devices with Bluetooth technology within range startto appear on the display.Device icons: — computer, — phone, — audioor video device, and — other device.To interrupt the search, select Stop.Tip! When searching for devices, some devices mayshow only the unique address (device address). Tofind the unique address of your device, enter thecode *#2820# in the standby mode.Pair devicesTo open the paired devices view ( ), in the Bluetoothapplication main view, press .Before pairing, create your own passcode (1—16 digits),and agree with the owner of the other device to use thesame code. Devices that do not have a user interface havea factory-set passcode. The passcode is used only once.To pair with a device, select Options > New paireddevice. Devices with wireless Bluetooth technology withinrange start to appear on the display. Select the device, andenter the passcode. The same passcode must be enteredon the other device as well. After pairing, the device issaved to the paired devices view.9243184_N71-1_en_apac.book Page 75 Friday, May 26, 2006 2:31 PM