CameraRecord videosIf the camera is in image mode, to select video mode, selectOptions > Video mode.To select the secondary camera (for example, to includeyourself in the video), select Options > Use second. cam..To use the main camera again, select Options > Use maincamera.The zoom indicator, which appears on the side pane, showsthe zoom level. Press or to zoom in or zoom out.1 Press to start recording. The record icon isshown. The LED flash is lit, and a tone sounds,indicating to the subject that video is being recorded.There is no flash effect on the resultant video.2 To pause recording at any time, select Pause. The pauseicon blinks on the display. Video recordingautomatically stops if recording is set to pause andthere are no key presses within a minute.After a video clip is recorded, do the following:• To immediately play the video clip you just recorded,select Options > Play.• If you do not want to keep the video, select Options >Delete.• To return to the viewfinder to record a new video,press .• To send the video Via multimedia, Via e-mail, or ViaBluetooth, or Via infrared, select Options > Send. Formore information, see "Messaging", on page 28 and"Bluetooth connectivity", on page 73. This option is notavailable during an active call.• To send a video clip to the other party during an activecall, select Options > Send to caller.• To edit the video, select Options > Edit. See also "Editvideo clips", on page 19.Video recorder setup9243184_N71-1_en_apac.book Page 15 Friday, May 26, 2006 2:31 PM
