Make callsVoice calls1. In the standby mode, enter the phone number,including the area code. To remove a number,press C.For international calls, press * twice for the +character (which replaces the internationalaccess code), and enter the country code, areacode (omit the leading zero if necessary), andphone number.2. To make the call, press the call key.3. To end the call (or to cancel the call attempt),press the end key.Pressing the end key always ends a call, even ifanother application is active.To make a call from Contacts, press , and selectContacts. Scroll to the desired name, or enter thefirst letters of the name to the search field. To callthe contact, press the call key. If you have savedseveral numbers for a contact, select the desirednumber from the list, and press the call key.Options during a callTo adjust the volume during a call, use the volumekey on the side of your device. You can also use thescroll key. If you have set the volume to Mute, selectUnmute first.To send an image or a video clip in a multimediamessage to the other participant of the call, selectOptions > Send MMS (in UMTS networks only). Youcan edit the message and change the recipientbefore sending. Press the call key to send the file toa compatible device (network service).To put an active voice call on hold while answeringanother incoming call, select Options > Hold. Toswitch between the active and the held call, selectOptions > Swap.To send DTMF tone strings (for example, apassword), select Options > Send DTMF. Enter theDTMF string or search for it in Contacts. To enter await character (w) or a pause character (p), press *repeatedly. To send the tone, select OK. You can add140 Make calls
