Access pointsCreate a new access pointPress , and select Tools > Settings >Connection > Destinations.You may receive access point settings in a messagefrom a service provider. Some or all access pointsmay be preset for your device by your serviceprovider, and you may not be able to change, create,edit, or remove them.When you open one of the access point groups ( ,, , ), you can see the access point types:indicates a protected access pointindicates a packet data access pointindicates a WLAN access pointTip: You can create internet access points ina wireless LAN with the WLAN wizard.To create a new access point, select New accesspoint. The device asks to check for availableconnections. After the search, connections that arealready available are shown and can be shared by anew access point. If you skip this step, you are askedto select a connection method and to define thesettings needed.To edit the settings of an access point, open one ofthe access point groups, select an access point andEdit. Follow the instructions from your serviceprovider.● Connection name — Enter a name for theconnection.● Data bearer — Select the data connection type.Depending on the data connection you select, onlycertain setting fields are available. Fill in all fieldsmarked with Must be defined or with a red *. Otherfields can be left empty, unless your service providerhas instructed otherwise.To use a data connection, your service providermust support this feature, and if necessary, activateit for your SIM card.Create access point groupsPress , and select Tools > Settings >Connection > Destinations.Some applications allow you to use access pointgroups for network connection.To avoid selecting a single access point every timethe device makes a network connection, you cancreate a group that contains various access pointsto connect to that network and define the order inwhich the access points are used.Settings186 Settings
