made, it may be possible to continue calculating thecoordinates of your location with three satellites.However, the accuracy is generally better whenmore satellites are found.Route guidancePress , and select Tools > Connectivity > GPSdata > Navigation.Start the route guidance outdoors. If startedindoors, the GPS receiver may not receive thenecessary information from the satellites.Route guidance uses a rotating compass on thedevice display. A red ball shows the direction to thedestination, and the approximate distance to it isshown inside the compass ring.Route guidance is designed to show the straightestroute and the shortest distance to the destination,measured in a straight line. Any obstacles on theroute, such as buildings and natural obstacles, areignored. Differences in altitude are not taken intoaccount when calculating the distance. Routeguidance is active only when you move.To set your trip destination, select Options > Setdestination and a landmark as the destination, orenter the latitude and longitude coordinates. SelectStop navigation to clear the destination set foryour trip.Retrieve position informationPress , and select Tools > Connectivity > GPSdata > Position.In the position view, you can view the positioninformation of your current location. An estimate ofthe accuracy of the location is displayed.To save your current location as a landmark, selectOptions > Save position. Landmarks are savedlocations with more information, and they can beused in other compatible applications andtransferred between compatible devices.Trip meterPress , and select Tools > Connectivity > GPSdata > Trip distance.Select Options > Start to activate trip distancecalculation, and Stop to deactivate it. Thecalculated values remain on the display. Use thisfeature outdoors to receive a better GPS signal.Select Reset to set the trip distance and time andaverage and maximum speeds to zero, and to starta new calculation. Select Restart to set theodometer and total time to zero.The trip meter has limited accuracy, and roundingerrors may occur. Accuracy can also be affected byavailability and quality of GPS signals.60 Positioning (GPS)
