the device adapts to the main user’s voice torecognise the voice commands better.The voice tag for a contact is the name or nicknamethat is saved on the contact card. To listen to thesynthesised voice tag, open a contact card, andselect Options > Play voice tag.Make a call with a voice tagNote: Using voice tags may be difficult in anoisy environment or during an emergency, so youshould not rely solely upon voice dialing in allcircumstances.When you use voice dialling, the loudspeaker is inuse. Hold the device at a short distance away whenyou say the voice tag.1. To start voice dialling, in the standby mode,press and hold the right selection key. If acompatible headset with the headset key isattached, press and hold the headset key to startvoice dialling.2. A short tone is played, and Speak now isdisplayed. Say clearly the name or nickname thatis saved on the contact card.3. The device plays a synthesised voice tag for therecognised contact in the selected devicelanguage, and displays the name and number.After a timeout of 2.5 seconds, the device dialsthe number. If the recognised contact was notcorrect, select Next to view a list of othermatches or Quit to cancel voice dialling.If several numbers are saved under the name, thedevice selects the default number if it has been set.Otherwise the device selects the first availablenumber in a contact card.Make a video callWhen you make a video call (network service), youcan see a real-time, two-way video between youand the recipient of the call. The live video image,or video image captured by the camera in yourdevice is shown to the video call recipient.To be able to make a video call, you must have aUSIM card and be in the coverage of a UMTS network.For availability of and subscription to video callservices, contact your network service provider.A video call can only be made between two parties.The video call can be made to a compatible mobiledevice or an ISDN client. Video calls cannot be madewhile another voice, video, or data call is active.IconsYou are not receiving video (the recipient is notsending video or the network is not transmitting it).You have denied video sending from yourdevice. To send a still image instead, select Tools > 123 Make calls
