minutes, the indicator changes to . The deviceadds the current positioning information to allpictures that you took during that time● — Location information is available andadded to all pictures you take.See "Still image camera settings", p. 42.In Gallery, pictures with location information areindicated by .FlashThe flash is available only in the main camera.Keep a safe distance when using the flash. Do notuse the flash on people or animals at close range.Do not cover the flash while taking a picture.The camera of your device has a xenon flash for lowlight conditions. The xenon flash is not available inthe sports scene mode or when Burst is selected inthe sequence mode.You cannot take pictures if the xenon flash is notfully charged, unless you have set the flash to Off.When the flash is charging, blinks on the display.Charging the xenon flash usually takes a couple ofseconds.The following flash modes are available for the stillimage camera: Automatic ( ), Red-eye ( ), On( ), and Off ( ).To change the flash mode, in the active toolbar,select the desired flash mode.ScenesScenes are only available in the main camera.A scene helps you to find the right colour andlighting settings for the current environment. Thesettings of each scene have been set according to acertain style or environment.The default scene in the image mode is Auto, andin the video mode Automatic (both indicated with).To change the scene, in the active toolbar, selectScene modes and a scene.To make your own scene suitable for a certainenvironment, scroll to User defined, and selectOptions > Change. In the user defined scene youcan adjust different lighting and colour settings. Tocopy the settings of another scene, select Based onscene mode and the desired scene. To save thechanges and return to the scenes list, press Back.To activate your own scene, scroll to Userdefined, press the scroll key, and select Select.Take pictures in a sequenceThe sequence mode is available only in the maincamera. 37 Camera
