Charge the batteryRegular charging1. Connect a compatible chargerto a wall outlet.2. Connect the power cord to thedevice. If the battery iscompletely discharged, it maytake a while before thecharging indicator startsscrolling.3. When the battery is fullycharged, the chargingindicator stops scrolling.Disconnect the charger fromthe device, then from the walloutlet.Tip: Disconnect the charger from the walloutlet when the charger is not in use. Acharger that is connected to the outletconsumes power even when it is notconnected to the device.USB chargingYou can use USB charging when a wall outlet is notavailable. With USB charging, you can also transferdata while charging the device.1. Connect a compatible USB cable between acompatible USB device and your device.Depending on a type of device that is used forcharging , it may take a while for charging tostart.2. If the device is switched on, you can select fromthe USB mode options on the display of thedevice.Antenna locationsYour device may have internal and externalantennas. As with any radio transmitting device,avoid touching the antenna area unnecessarilywhile the antenna is transmitting or receiving.Contact with such an antenna affects thecommunication quality and may cause the device tooperate at a higher power level than otherwiseneeded and may reduce the battery life.1 — Bluetooth and wireless LAN antenna, and GPSreceiver16 Get started
