WLAN access point device at a time, but severalapplications can use the same internet access point.When the device is in the offline profile, you can stilluse WLAN (if available). Remember to comply withany applicable safety requirements whenestablishing and using a WLAN connection.Tip: To check the unique media access control(MAC) address that identifies your device,enter *#62209526# in the standby mode.WLAN wizardThe WLAN wizard helps you to connect to a WLANand manage your WLAN connections.The WLAN wizard shows the status of your WLANconnections in the active standby mode. To view theavailable options, scroll to the row showing thestatus, and select it.If the search finds WLANs, for example, WLANnetwork found is displayed, to create an internetaccess point (IAP) and start the web browser usingthis IAP, select the status and Start Webbrowsing.If you select a secured WLAN network, you are askedto enter the relevant passcodes. To connect to ahidden network, you must enter the correctnetwork name (service set identifier, SSID). Tocreate a new access point for a hidden WLAN, selectNew WLAN.If you are connected to a WLAN, the IAP name isdisplayed. To start the web browser using this IAP,select the status and Continue Web browsing. Toend the connection in the WLAN, select the statusand Disconnect WLAN.If WLAN scanning is off and you are not connectedto any WLAN, WLAN scanning off is displayed. Toset scanning on and search for available WLANs,select the status and press the scroll key.To start a search for available WLANs, select thestatus and Search for WLAN. To set WLAN scanningoff, select the status and select WLAN scanningoff.To access the WLAN wizard application in the menu,press , and select Tools > WLAN wiz..WLAN internet access pointsPress , and select Tools > WLAN wiz.Select Options and from the following:● Filter WLAN networks — Filter out WLANs inthe list of found networks. The selected networksare filtered out the next time the applicationsearches for WLANs.● Details — View the details of a network shownin the list. If you select an active connection, theconnection details are displayed.● Define access point — Create an internet accesspoint (IAP) in a WLAN.41 Connections
