● Pre-shared key — Enter a password. Thesame password must be entered on the WLANaccess point device.● WPA2 only mode — Only WPA2 enabled devicesare allowed to establish a connection in thismode.Advanced WLAN settingsSelect Options > Advanced settings and from thefollowing:● IPv4 settings — Enter the IP address of yourdevice, the subnet IP address, the defaultgateway, and the IP addresses of the primary andsecondary DNS servers. Contact your internetservice provider for these addresses.● IPv6 settings — Define the type of DNS address.● Ad-hoc channel (only for Ad-hoc) — To enter achannel number (1-11) manually, select Userdefined.● Proxy server address — Enter the address forthe proxy server.● Proxy port number — Enter the proxy portnumber.Packet data settingsPress , and select Tools > Settings >Connection > Packet data.The packet data settings affect all access pointsusing a packet data connection.● Packet data connection — If you select Whenavailable and you are in a network that supportspacket data, the device registers to the packetdata network. Starting an active packet dataconnection (for example, to send and receive e-mail) is quicker. If there is no packet datacoverage, the device periodically tries toestablish a packet data connection. If you selectWhen needed, the device uses a packet dataconnection only if you start an application oraction that needs it.● Access point — The access point name is neededto use your device as a packet data modem to acompatible computer.● High speed packet access — Enable or disablethe use of HSDPA (network service) in UMTSnetworks.Wireless LAN settingsPress , and select Tools > Settings >Connection > Wireless LAN.● Show WLAN availability — Select whetheris displayed in the standby mode when a wirelessLAN is available.● Scan for networks — If you set Show WLANavailability to Yes, select how often the devicesearches for available wireless LANs and updatesthe indicator. 173 Settings
