● Default profile — Set the profile that you wantactivated each time you connect a Nokia VideoConnectivity Cable to your device.● TV screen size — Select the aspect ratio of theTV: Normal or Widescreen for widescreen TVs.● TV system — Select the analogue video signalsystem that is compatible with your TV.● Flicker filter — To improve image quality on thescreen of your TV, select On. The flicker filter maynot diminish image flicker on all TV screens.Slide handling settingsSelect Menu > Tools > Settings and General >Slide handling.Select from the following:● Opening the slide — Set the device to answeran incoming call when you open the slide.● Closing the slide — Set the device to end anactive call when you close the slide.● Keyguard activation — Set the device to lockthe keypad when you close the slide.Sensor settings and displayrotationWhen you activate the sensors in your device, youcan control certain functions by turning the device.Select Menu > Tools > Settingsand General >Sensor settings.Select from the following:● Sensors — Activate the sensors.● Turning control — Select Silencing calls andSnoozing alarms to mute calls and snoozealarms by turning your device so that the displayfaces down.Security settingsPhone and SIMSelect Menu > Tools > Settings and General >Security > Phone and SIM card and from thefollowing:● PIN code request — When active, the code isrequested each time the device is switched on.Deactivating the PIN code request may not beallowed by some SIM cards.● PIN code, PIN2 code, and Lock code — You canchange the PIN code, PIN2 code, and lock code.These codes can only include the numbers from0 to 9.If you forget the PIN or the PIN2 code, contactyour service provider. If you forget the lock code,contact a Nokia Care point or your serviceprovider.157 Settings
