location, select Current position. To select thelocation from map, select Select from map. Toenter the position information manually, selectEnter manually.● Edit — Edit or add information to a savedlandmark (for example, a street address).● Add to category — Add a landmark to acategory in Landmarks. Select each category towhich you want to add the landmark.● Send — Send one or several landmarks to acompatible device. Your received landmarks areplaced in the Inbox folder in Messaging.You can sort your landmarks into preset categories,and create new categories. To edit and create newlandmark categories, open the categories tab, andselect Options > Edit categories.GPS dataSelect Menu > Applications > GPS data.GPS data is designed to provide route guidanceinformation to a selected destination, positioninformation about your current location, andtravelling information, such as the approximatedistance to the destination and the approximateduration of travel.The coordinates in the GPS are expressed in degreesand decimal degrees format using the internationalWGS-84 coordinate system.To use GPS data, the GPS receiver of your devicemust initially receive position information from atleast four satellites to calculate the coordinates ofyour location. When the initial calculation has beenmade, it may be possible to continue calculating thecoordinates of your location with three satellites.However, the accuracy is generally better whenmore satellites are found.Route guidanceSelect Menu > Applications > GPS data andNavigation.Start the route guidance outdoors. If startedindoors, the GPS receiver may not receive thenecessary information from the satellites.Route guidance uses a rotating compass on thedevice display. A red ball shows the direction to thedestination, and the approximate distance to it isshown inside the compass ring.Route guidance is designed to show the straightestroute and the shortest distance to the destination,measured in a straight line. Any obstacles on theroute, such as buildings and natural obstacles, areignored. Differences in altitude are not taken intoaccount when calculating the distance. Routeguidance is active only when you move.82 Positioning (GPS)
