● Internet call alert — To be alerted for incominginternet calls, select On. If you select Off, you arenot alerted, but you receive a notification if youmissed a call.● Reject call with message — To send a textmessage to a caller informing why you could notanswer the call, select Yes.● Message text — Write a text to be sent in a textmessage when you reject a call.● Image in video call — If video is not sent duringa video call, you can select a still image to bedisplayed instead.● Automatic redial — Select On, and your devicemakes a maximum of 10 attempts to connect thecall after an unsuccessful call attempt. To stopautomatic redialling, press the end key.● Show call duration — Activate this setting ifyou want the length of a call to be displayedduring the call.● Summary after call — Activate this setting ifyou want the length of a call to be displayed afterthe call.● Speed dial — Select On, and the numbersassigned to the number keys (2 to 9) can bedialled by pressing and holding the key. See "Speed dial a phone number ", p. 125.● Anykey answer — Select On, and you cananswer an incoming call by briefly pressing anykeypad key, except the power key, selection keys,zoom/volume key, or capture key.● Line in use — This setting (network service) isshown only if the SIM card supports twosubscriber numbers, that is, two phone lines.Select which phone line you want to use formaking calls and sending text messages. Calls onboth lines can be answered irrespective of theselected line. If you select Line 2 and have notsubscribed to this network service, you are notable to make calls. When line 2 is selected, isshown in the standby mode.● Line change — To prevent line selection(network service), select Disable if supported byyour SIM card. To change this setting, you needthe PIN2 code.Call divertSelect Menu > Tools > Settings and Phone >Call divert.Call divert allows you to divert incoming calls toyour voice mailbox or another phone number. Fordetails, contact your service provider.To activate call divert, select Activate. To checkwhether the option is active, select Check status.Several diverting options can be active at the sametime. When all calls are diverted, is shown inthe standby mode.161 Settings
