Nokia N93i-1 User Manual

Also see for NOKIA N93i-1: Get started Get started Quick start guide

Contents

Nokia N93i-1 User Manual Manual pdf 116 page image

Settings116WEP key settings—Enter WEP encryption (length of thekey), WEP key format (ASCII or Hexadecimal), and WEPkey (the WEP key data in the selected format).Security settings for 802.1x and WPA/WPA2 are asfollows:WPA mode—Select the means of authentication: EAP touse an extensible authentication protocol (EAP) plug-in orPre-shared key to use a password. Complete theappropriate settings:EAP plug-in settings (only for EAP)—Enter the settings asyour service provider instructs.Pre-shared key (only for Pre-shared key)—Enter apassword. The same password must be entered on thewireless LAN access point device.TKIP encryption—Select whether Temporal Key IntegrityProtocol (TKIP) is used.Homepage—Define a home page.Select Options > Advanced settings and from thefollowing:IPv4 settings: Phone IP address (the IP address of yourdevice), Subnet mask (the subnet IP address), Defaultgateway (the gateway), and DNS address—Enter the IPaddresses of the primary and secondary DNS server.Contact your internet service provider for these addresses.IPv6 settings > DNS address—Select Automatic,Well-known, or User defined.Ad-hoc channel (only for Ad-hoc)—To enter a channelnumber (1-11) manually, select User defined.Proxy serv. address—Enter the address for the proxyserver.Proxy port number—Enter the proxy port number.Packet dataThe packet data settings affect all access points using apacket data connection.Packet data conn.—If you select When available and youare in a network that supports packet data, the deviceregisters to the packet data network. Starting an activepacket data connection is quicker. If there is no packetdata coverage, the device periodically tries to establish apacket data connection. If you select When needed, thedevice uses a packet data connection only if you start anapplication or action that needs it.Access point—The access point name is needed to use yourdevice as a packet data modem to your computer.SIP settingsSIP (Session Initiation Protocol) settings are needed forcertain network services using SIP, such as video sharing.