Camera29self-timer indicator ( ) blinks and the device beeps whenthe timer is running. The camera takes the picture after theselected delay elapses.You can also use the self-timer in the sequence mode.Tip! Select Options > Self timer > 2 seconds to keepyour hand steady when taking a picture.FlashThe flash is available only in the main camera.Keep a safe distance when using the flash. Do not use theflash on people or animals at close range. Do not cover theflash while taking a picture.The camera has an LED flash for low light conditions. Thefollowing flash modes are available: Automatic ( ), On( ), and Off ( ).To switch between the flash modes, press the flash key.Setup settings—color and lightingTo enable the camera to reproduce colors and lightingmore accurately or to add effects to your pictures orvideos, scroll through the toolbar, and select from thefollowing options:Shooting mode—Select a proper shooting mode for theenvironment in which you take pictures. Every shootingmode uses its own lighting settings that have beenadjusted according to a certain kind of environment.White balance—Select the current lighting conditionfrom the list. This allows the camera to reproduce colorsmore accurately.Exposure value (images only)—Adjust the exposure timeof the camera.Colour tone—Select a color effect from the list.The screen display changes to match any settings youmake so you see how the change affects the pictures orvideos.The available settings vary depending on the selectedcamera.The setup settings are camera specific; if you change thesettings in the secondary camera, the settings in the maincamera do not change. The setup settings do, however,transfer between the image and video modes. The setupsettings return to the default settings when you close thecamera.Shooting modesA shooting mode helps you to find the right color andlighting settings for the current environment. Select aproper shooting mode for taking pictures or recordingvideo clips from the shooting mode list. The settings of