Nokia N93i-1 User Manual

Also see for NOKIA N93i-1: Get started Get started Quick start guide

Contents

Nokia N93i-1 User Manual Manual pdf 27 page image

Camera27The camera viewfinder displays the following:• Status indicators(1) for sequenceon, self-timer on;Automatic ( ),On ( ), or Off( ) flash mode,and the currentcapture mode• The toolbar (2),which you canscroll through before capturing the image to select theshooting mode, white balance, exposure value, andcolor tone (the toolbar is not displayed during focusand image capture)• The image resolution indicator (3) indicates whetherthe quality of the image is Print 3M - Large(2048x1536 resolution), Print 2M - Med. (1600x1200resolution), Print 1.3M - Small (1280x960 resolution),or MMS 0.3M (640x480 resolution).• The image counter (4) displays the estimated number ofimages you can capture using the current image qualitysetting and memory in use (the counter is not displayedduring focus and image capture).• The device memory ( ) and memory card ( )indicators (5) show where images are saved.Tip! Select Options > Turn icons on to display allviewfinder indicators or Turn icons off to displayonly the camera status indicators.When taking a picture, note the following:• The quality of a digitally zoomed picture is lower thanthat of a nonzoomed picture.• The camera goes into the battery saving mode if thereare no keypresses for a moment. To continue takingpictures, press .After you take the picture, select the following from thetoolbar:• If you do not want to keep the image, select Delete.• To send the video using multimedia, e-mail, Bluetoothconnectivity, or infrared, press , or select Send.• To capture a new image, select New image.• To print the picture, select Print. See ‘Image print’,p. 36.Still image camera settingsThere are two kinds of settings for the still image camera:Image setup and main settings. To adjust image setup, see‘Setup settings—color and lighting’, p. 29. The setupsettings return to the default settings after you close thecamera, but the main settings remain the same until youchange them again. To change the main settings, selectOptions > Settings and from the following:ExitOptions