To establish a data connection, an access point isrequired. You can define different kinds of accesspoints, such as the following:● MMS access point to send and receive multimediamessages● Internet access point (IAP) to send and receive e-mail and connect to the internetCheck the type of access point you need with yourservice provider for the service you want to access.For availability and subscription to packet dataconnection services, contact your service provider.Access pointsCreate a new access pointPress , and select Tools > Settings >Connection > Access points.You may receive access point settings in a messagefrom a service provider. Some or all access pointsmay be preset for your device by your serviceprovider, and you may not be able to change, create,edit, or remove them.indicates a protected access point.indicates a packet data access point.indicates a WLAN access point.Tip: You can create internet access pointsin a wireless LAN with the WLAN wizard.To create a new access point, select Options >New access point.To edit the settings of an access point, selectOptions > Edit. Follow the instructions from yourservice provider.● Connection name — Enter a descriptive namefor the connection.● Data bearer — Select the data connection type.Depending on the data connection you select, onlycertain setting fields are available. Fill in all fieldsmarked with Must be defined or with a redasterisk. Other fields can be left empty, unless youhave been instructed otherwise by your serviceprovider.To be able to use a data connection, your serviceprovider must support this feature, and if necessary,activate it for your SIM card.Packet data access pointsPress , and select Tools > Settings >Connection > Access points > Options > Editor New access point.Follow the instructions from your service provider.● Access point name — You obtain the accesspoint name from your service provider.● User name — The user name may be needed tomake a data connection, and is usually providedby the service provider. 151 Settings
