Tip: To switch between the general andsilent profiles in the standby mode, pressand hold #.To modify a profile, scroll to the profile, and selectOptions > Personalise. Scroll to the setting youwant to change, and press the scroll key to open thechoices. Tones stored in the mass memory of yourdevice are indicated with .In the tones list, select Download sounds (networkservice) to open a list of bookmarks. You can selecta bookmark and start connection to a web page todownload more tones.If you want the caller’s name to be spoken whenyour device rings, select Options > Personalise,and set Say caller's name to On. The caller’s namemust be saved in Contacts.To create a new profile, select Options > Createnew.3-D tonesPress , select Tools > Utilities > 3-D tones.With 3-D tones, you can enable three-dimensionalsound effects for ringing tones. Not all ringing tonessupport 3-D effects.To enable the 3-D effects, select 3-D ringing toneeffects > On. To change the ringing tone, selectRinging tone and the desired ringing tone.To change the 3-D effect that is applied to theringing tone, select Sound trajectory and thedesired effect.To modify the effect, select from the followingsettings:● Trajectory speed — Scroll left or right to adjustthe speed at which sound moves from onedirection to another. This setting is not availablefor all ringing tones.● Reverberation — Select the type of echo.● Doppler effect — Select On to have the ringingtone sound louder when you are closer to yourdevice, and softer when you are farther away.When you get closer to the device, the ringingtone appears to become louder, and softer whenyou move away from it. This setting is notavailable for all ringing tones.To listen to the ringing tone with the 3-D effect,select Options > Play tone. If you enable the 3-Dtones but do not select any 3-D effect, stereowidening is applied to the ringing tone.To adjust the ringing tone volume, select Tools >Profiles > Options > Personalise > Ringingvolume.98 Personalise your device
