. Press and hold the capture key. The device capturesimages until you select Stop or until the memory runs out.The captured images are displayed in a grid. To view animage, select the image. To return to the sequence modeviewfinder, press the capture key.You can also use sequence mode with the self-timer.To turn off sequence mode, select > Single shot.You in the image — self-timerUse the self-timer to delay the capture so that you caninclude yourself in the image.To set the self-timer delay, select > , and the delayneeded before the image is captured.To activate the self-timer, select Activate. The stopwatchicon on the screen blinks and the remaining time isdisplayed when the timer is running. The camera capturesthe image after the selected delay elapses.To switch off the self-timer, select > > .Tip: Select 2 seconds to keep your hand steady whencapturing an image.Video recordingRecord a video1 To switch from image mode to video mode, ifnecessary, select > .2 To start recording, press the capture key or select .A red record icon is displayed.3 To pause recording, select Pause. To resume, selectContinue. If you pause recording and do not press anykey within one minute, the recording stops.To zoom in or out, use the zoom keys.4 To start recording, press the capture key. The videoclip is automatically saved in Photos.Video recording on-screen controls and indicatorsThe video viewfinder displays the following:1 Capture mode indicator2 Audio mute on indicator3 Capture icon. Select to record video clips.4 Video light indicator105 Camera
