M o u n t i n g t h e s p e a k e r p h o n e i n a v e h i c l e12■ Attach to a windscreenYou can attach the speakerphone to the windscreen using the suppliedmounting device.1. Insert the catch on themounting device into theslot at the back of thespeakerphone (1). Rotatethe speakerphone clockwiseuntil it locks into place (2).2. Locate a safe mountingsurface on the windscreen,and clean the surfacethoroughly withglasscleaner and a clean towel.If the ambient temperature is below +15°C (60°F), carefully warmthe surface and the suction cup with a hair dryer to ensure a firmgrip on the windscreen. Ensure that you do not heat the windscreenexcessively to avoid damaging it.3. Press the suction cup of the mounting device against the windscreen(3), and rotate the mounting device clockwise (4) to create a vacuumbetween the suction cup and the windscreen. Check that the suctioncup is firmly attached.4. Turn the speakerphone to the desired position.To detach the speakerphone from the mounting device, rotate itanticlockwise.To detach the suction cup from the windscreen, rotate the mountingdevice anticlockwise, and pull the strap located on the edge of thesuction cup.