B a s i c u s e144. Basic use■ Copy contacts to the speakerphoneWhen the speakerphone is connected to a compatible mobile devicethat supports the PBAP Bluetooth profile, you can copy the contacts(names and phone numbers) from the internal memory of the device tothe speakerphone. When the speakerphone is connected to a compatibledevice that supports the OPP Bluetooth profile, you can copy thecontacts to the speakerphone by sending them through a Bluetoothconnection from your device. For information about the Bluetoothprofiles supported by your device, see the device’s user guide of thedevice.To copy the contacts if your device supports the PBAP profile, turn thevolume wheel left until is displayed, and press the answer/end key. flashes during copying. If is displayed, try to copythe contacts using the OPP profile.To copy a contact if your device supports the OPP profile, select thecontact in your device, and send the contact to the speakerphonethrough a Bluetooth connection. Sending several contacts usingthe OPP profile takes longer than using the PBAP profile.Copying may take a few minutes and is automatically stopped after600 contacts; to stop copying manually when you use the PBAP profile,press and hold the answer/end key. While the contacts are being copied,you cannot use the contacts that you have previously copied to thespeakerphone.If you want to update the contacts from your device to thespeakerphone, copy the contacts again. If you use the PBAP profile,the previously copied contacts are replaced with the new ones.The speakerphone supports three phone numbers per contact.If a contact has more than three phone numbers saved in yourdevice and you want three particular numbers to be copied to thespeakerphone, save the three numbers as a new contact in your device.