M o u n t i n g t h e s p e a k e r p h o n e i n a v e h i c l e13■ Attach to a dashboardYou can attach the speakerphone to the dashboard using the suppliedmounting device and adhesive pad.1. Ensure that the surface where you attach the adhesive pad on thedashboard is flat, dry, and free from dirt and dust.2. Insert the catch on the mounting deviceinto the slot at the back of thespeakerphone (1). Rotate thespeakerphone clockwise until it locks intoplace (2).3. Peel off the protective sheetfrom the adhesive side of thepad (3), and press the padagainst the dashboard (4) sothat it stays firmly in place.When you peel off theprotective sheet from the pad,do not touch the adhesive side.4. Peel off the protective sheet from the otherside of the pad, and press the suction cup onthe mounting device against the pad (5).5. Turn the speakerphone to the desiredposition (6).6. Rotate the mounting device clockwise tocreate a vacuum (7). Check that the suctioncup is firmly attached.To detach the speakerphone from the mounting device, rotate itanticlockwise.To detach the mounting device from the dashboard, rotate themounting device anticlockwise, and pull the strap located onthe edge of the suction cup.