Copyright © 2004 Nokia. All rights reserved. 49S e t t i n g s ( M e n u 5 )Note: Contact your callingcard company for moreinformation.Make callsAfter you have saved your callingcard information in your phone, youcan make a call using your callingcard.1. At the standby mode, selectMenu > Settings > Call settings >Calling card.2. Enter your security code, andpress OK. (See Security code, 57for more information.)3. Scroll to the calling card of yourchoice, select Options > Select >OK.4. Press the End key to return to thestandby mode; then enter thephone number, including anyprefix (such as 0 or 1) that yourcalling card may require whenyou make a calling card call.See your calling card forinstructions.5. Press and hold the Talk key for afew seconds until Card call isdisplayed.6. When you hear the tone orsystem message, press OK.Receive data or fax callsData or fax calls is a network service.See Network services, ix for moreinformation.If your wireless service providersupports this feature, you can set upthe phone to send or receive data orfax calls when a terminal, such as aPDA or PC, is connected.For better performance during datacalls, place the phone on astationary surface. Do not move thephone by holding it in your handduring a data call.Note: For more informationon connectivity, refer to thePC/PDA Connectivity Guide.The PC/PDA ConnectivityGuide can be downloadedfrom the Nokia website athttp://www.nokia-asia.com/.1. At the standby mode, selectMenu > Settings > Call settings >Data/fax calls > Incoming data/fax call > Normal, Data calls only,or Fax calls only.Normal—The phone receivesincoming calls as usual.Data calls only—The phonereceives only data calls.Fax calls only—The phonereceives only fax calls.2. When you are finished receivingthe fax or data call, repeat step 1and select Normal.