AG 2100176 System AdministrationViewing RADIUS Proxy Accounting History {RADIUS Session History}These settings are available under Subscriber Administration/RADIUS Session History menu.Enable Logfile checkboxWhen this setting is enabled any RADIUS proxy accounting messages sent or received by theRADIUS proxy application are logged into a file named “RADHIST.RAD” in the /flashdirectory. This log contains accounting messages exchanged with downstream servers, andupstream NASs. The size of the log file is limited to 2000 records (accounting messages) or320000 bytes -- when and if necessary the oldest records are purged to make room for newrecords.If the logfile is disabled the current logfile is purged from the flash. If this is re-enabled again,only RADIUS accounting message sent/received from that point in time forward will be storedin the log.Enable Syslogs checkboxIf enabled then the same information described above is sent to the configured Syslog server.The content of the syslogs is sent in human-readable format. The configuration page of thesyslog server to which these RADIUS proxy accounting messages are sent is available underthe Configuration/Logging menu as described above. The third set of Syslog parameters onthat page pertains to the RADIUS History Log.