Installation 3-1Part 1124631_01E 2015 Nordson CorporationSection 3InstallationWARNING! Allow only personnel with appropriate training and experience tooperate or service the equipment. The use of untrained or inexperiencedpersonnel to operate or service the equipment can result in injury, includingdeath, to themselves and others, and damage to the equipment.WARNING! Allow only qualified personnel to perform the following tasks.Follow the safety instructions in this document and all other relateddocumentation.Mounting the Spectra 30Equipment and production line configuration may dictate a variation in themounting options described in this section. Regardless of the mountingmethod used, refer to Guidelines.Unpack the Pattern Controller1. Carefully unpack the pattern controller. Exercise care to preventequipment damage during unpacking.2. Inspect for any damage that may have occurred during shipping. Reportany damage to your Nordson representative.GuidelinesS Position the pattern controller as close as possible to the parent machineor production line.S Mount the pattern controller vertically on the wall or post.S Ensure that the mounting location provides sufficient clearance aroundthe bottom of the pattern controller to allow room for cable entry.
