Nortel 1000 Applications Installation And Commissioning

Also see for 1000 Con?guration guide: Brochure Reference User manual Overview User guide

Contents

Nortel 1000 Applications Installation And Commissioning Manual pdf 82 page image

82 Installation and configuration of applications on Linux baseFigure 73Primary Security Service fingerprint window12 The nortel password screen appears. Type the password of thenortel account and press Enter. The connection to the PrimarySecurity Service server is complete.The installation takes approximately 30 minutes to complete.After the installation is complete the disk automatically ejectsfrom the drive and a summary of the installation is shown on thescreen.For detailed information about NRS, see Network RoutingService Installation and Commissioning (NN43001-564) () .--End--Install the Element Manager applicationsUse this procedure to run the application DVD after the reboot is completefor the Linux base install.Installing the Primary Security Service and Element ManagerStep Action1 Log on to the server using the nortel account.2 Insert the MGMT DVD in the DVD tray.3 Enter the appinstall CLI command.4 At the prompt, enter the root account password.The system then prompts you to check the media.5 Enter Y to check the media, or N to proceed without checking themedia, and press Enter.6 The Application Installation screen appears, as shown inFigure 74 "Application Installation window" (page 83). From theApplication installation window select 1 to install the PrimarySecurity Service with Element Manager. The appropriatepackages are installed to the hard drive.Nortel Communication Server 1000Linux Platform Base and Applications Installation and CommissioningNN43001-315 02.0929 October 2008Copyright © 2007–2008 Nortel Networks.