4 ContentsConfigure the DHCP server 57Partial DHCP mode 57Full DHCP mode 58Configure the DHCP server to support Full DHCP mode 59DHCP VLAN Auto Discovery 61Physically install the IP Phone 1120E 63Upgrade and convert the IP Phone 1120E firmware 67Introduction 67Upgrade the SIP Firmware on the IP Phone 1120E 67Download the SIP Firmware to the provisioning server 67Modify the SIP provisioning file 68Upgrade to the Minimum UNIStim Firmware 69Identify the current version of UNIStim Firmware 69Upgrade UNIStim Firmware to the minimum required UNIStim Firmware 72Convert UNIStim Firmware to SIP Firmware on the IP Phone 1120E 75Voice Quality Monitoring 79Feature overview 79VQMon set-up 79Server set-up 79How VQMon works 80Device Settings on the IP Phone 1120E with SIP Firmware 81Introduction 81802.1x (EAP) Port-based network access control 82Authorization 83Device ID 83Password 83DHCP 83NO DHCP mode 83SET IP 84Net Mask 84Gateway 84DNS IP 84Voice VLAN 84VLAN Filter 85Disable PC Port 85Data VLAN 86PC-Port Untag all 86Duplex 87Ignore GARP 87Provisioning 87PVQMon IP 88SIP Firmware Release 1.1 for IP Phone 1120E AdministrationNN43112-300 02.03 Standard27 May 2008Copyright © 2008, Nortel Networks.
