Nortel 2050 Installation Manual

Also see for Softphone 2050: User guide Installation and operation Installation and operation guide Fundamentals Fundamentals

Contents

Nortel 2050 Installation Manual Manual pdf 32 page image

NORTEL TPS 3D SENSOR AND DEFENSE CENTER INSTALLATION G UIDE RELEASE 4.7.0 PAGE 32Chapter 2: InstallationTPS 2070 DCTo install an SEU:1. Specify how you want to set the rule state for new rules after import:• If you want any new rules to use the default rule state set by Nortel in yourexisting policies, select In the default state.• If you want to disable new rules, select In the disabled state.2. You can upload the SEU to the Defense Center in one of two ways:• If your Defense Center has access to the Internet, select Download newSEU (from the support site), then click Update.WARNING! Make sure you upload the SEU directly from the Support site or byclicking Update. Do not transfer them by email, as it may become corruptedduring transmission.The SEU is updated and you can click Continue to continue with “Configuring asystem policy” on page 32.Configuring a system policyA system policy controls various aspects of an appliance. As part of the initialsetup, you can configure the default system policy and automatically apply it toyour Defense Center.TIP! To use the default settings, click Skip to complete the initial setup anddisplay the start page for your Defense Center.To configure the default system policy:Select a link on the left side of the page to move between the pages in the systempolicy, making changes as needed. You can click Save Policy and Continue atany point in the process to save the changes you already made and use thedefault settings for the remainder of the options. The start page for your DefenseCenter appears.Console outputPlease note that DC 4.7.0 installation output redirects to serial and not to theconsole.