Nortel 2050 Installation Manual

Also see for Softphone 2050: User guide Installation and operation Installation and operation guide Fundamentals Fundamentals

Contents

Nortel 2050 Installation Manual Manual pdf 49 page image

NORTEL TPS 3D SENSOR AND DEFENSE CENTER INSTALLATION G UIDE RELEASE 4.7.0 PAGE 49Chapter 3: Hardware specificationTPS 2x70 3D SensorChassis dimensionsThe Chassis Dimensions table lists the dimensions of the chassis.System operating environmentThis section describes the required office environment for the TPS 3D Sensor2070 and the TPS 3D Sensor 2170.Environmental parametersKeep the TPS 3D Sensor 2070 or the TPS 3D Sensor 2170 in an environmentthat meets the specifications in the Environmental Parameters table.Power supplyThe sensor power supply is rated for 400 watts.Rack and cabinet mounting optionsThe TPS 3D Sensor 2070 or the TPS 3D Sensor 2170 can be used in racks andserver cabinets that are 19 inches wide and up to 30 inches deep. The sensorcomes with a rack-mount kit. Refer to the instructions that are supplied with thesensor for more information about correctly mounting the chassis in a rack.Chassis DimensionsDimension Metric ImperialHeight 43 mm 1.7 inchesWidth 445 mm 16.7 inchesDepth 574 mm 25.6 inchesEnvironmental ParametersParameter LimitsOperating temperature 10°C to 35°C (50°F to 95°F)Non-operating temperature -40°C to +70°C (-40°F to +158°F)Operating humidity 8% to 90% non-condensing