Nortel 2050 Installation Manual

Also see for Softphone 2050: User guide Installation and operation Installation and operation guide Fundamentals Fundamentals

Contents

Nortel 2050 Installation Manual Manual pdf 42 page image

NORTEL TPS 3D SENSOR AND DEFENSE CENTER INSTALLATION G UIDE RELEASE 4.7.0 PAGE 42Chapter 2: Installation3D SENSOR 2x50/2x703. Select Passive or InLine from the Policy Mode drop-down list, as appropriate.TIP! Note that your policy becomes available, but does not take effect untilyou apply it to a detection engine. Click Save and continue with “Applying anintrusion policy” on page 42.Applying an intrusion policyThe Detection and Prevention page appears without a policy during initial startup.Click Create Policy to create a new intrusion policy. After the intrusion policy iscreated, the detection and prevention policy name page is displayed. Click Apply.next to the policy you want to use.Configuring a system policyA system policy controls various aspects of an appliance. As part of the initialsetup, you can configure the default system policy and automatically apply it toyour 3D Sensor.TIP! To use the default settings, click Skip to complete the initial setup anddisplay the start page for your Defense Center.To configure the default system policy:1. Select a link on the left side of the page to move between the pages in thesystem policy, making changes as needed. You can click Save Policy andContinue at any point in the process to save the changes you already madeand use the default settings for the remainder of the options. The start pagefor your 3D Sensor appears.Console outputPlease note that 3D Sensor 4.7.0 installation output redirects to serial and not tothe console.