20 Chapter 2 WLAN Handsets overviewNN40050-101NN40050-1016 Do one of the following:• Press UP to return to the previous menu and configure another option.• Press to exit all menus and return to the standby state.You can also press Exit from the top-level menu to exit the menu and return to the active(off-hook) state.Ring OptionsThe Ring Options enables you to configure the WLAN Handset ring tone for the three differentringer types: Telephone Ring, Auxiliary 1, and Auxiliary 2.Telephone Ring allows further configuration for:• Ring Cadence — controls the ringing rhythm.• Ring Tone — controls the ringing tone (see note 1).• Ring Volume — controls the ringing volume.• Vibrate Cadence — controls the vibration rhythm.• Ring Delay — controls how long the vibrate cadence plays before the audible ring starts (seenote 2).To select the Ring Cadence1 Press when the handset is in the standby state.2 Press the Up and Down buttons to scroll through the menu and highlight Ring Options.3 Press the Select button (or OK) to select Ring Options.4 Press the Up and Down buttons to scroll through the menu and highlight Telephone Ring.5 Press the Select button (or OK) to select Telephone Ring.6 Press the Up and Down buttons to scroll through the menu and highlight Ring Cadence.7 Press the Select button (or OK) to select Ring Cadence.Note: Auxiliary 1 and Auxiliary 2 are reserved for future use.Note: Ring Tone is not displayed in the menu when Ring Cadence is turned off.Note: Ring Delay is not displayed in the menu when Ring Cadence or VibrateCadence is turned off.