Nortel 2210 User Manual

Also see for 2210: Installation and operation guide Fundamentals Fundamentals Installation and operation Installation and operation

Contents

Chapter 2 WLAN Handsets overview 21WLAN IP Handset 2210/2211/2212 User Guide8 Scroll to one of the desired options:• Off — ringer is turned off.• PBX — ringing uses the distinctive ringing pattern sent to the handset from the call server.• Continuous — ringing is continuous.• Short Pulse — ringing occurs in short bursts.• Long Pulse — ringing occurs in long bursts.9 Press the Select button (or OK) to select the highlighted option.10 Do one of the following:• Press UP to return to the previous menu and configure another option.• Press to exit all menus and return to the standby state.You can also press Exit from the top-level menu to exit the menu and return to the active(off-hook) state.To select the Ring Tone1 Press when the handset is in the standby state.2 Press the Up and Down buttons to scroll through the menu and highlight Ring Options.3 Press the Select button (or OK) to select Ring Options.4 Press the Up and Down buttons to scroll through the menu and highlight Telephone Ring.5 Press the Select button (or OK) to select Telephone Ring.6 Press the Up and Down buttons to scroll through the menu and highlight Ring Tone.7 Press the Select button (or OK) to select Ring Tone.8 Scroll to one of the desired options:• Tone 1• Tone 2• Tone 3• Tone 4• Tone 59 Press the Play soft key to preview the tone.Note: Ring Tone is not displayed in the menu when Ring Cadence is turned off.