166 Chapter 14 System information and diagnosisNN47923-501System information and console port speedWith your system you can choose different console port speeds. To get to theSystem Information and Console Port Speed.1 Enter 24 to go to Menu 24 – System Maintenance.2 Enter 2 to open Menu 24.2 - System Information and Console Port Speed.3 From this menu you have two choices, as shown in Figure 80:Up Time This is the time this channel has been connected to the current remotenode.My WAN IP(from ISP)This is the IP address of the ISP remote node.Ethernet This shows statistics for the LAN.Status This shows the current status of the LAN.Tx Pkts This is the number of transmitted packets to the LAN.Rx Pkts This is the number of received packets from the LAN.Collision This is the number of collisions.WAN This shows statistics for the WAN.Line Status This shows the current status of the xDSL line which can be Up or Down.UpstreamSpeedThis shows the upstream transfer rate in kbps.DownstreamSpeedThis shows the downstream transfer rate in kbps.CPU Load This specifies the percentage of CPU utilization.Table 37 Menu 24.1 System Maintenance: Status (continued)Field Description
