Chapter 6 Remote Node setup 91Nortel Business Secure Router 252 Configuration — Advanced2 In menu 11.1, make sure IP is among the protocols in the Route field.3 Move the cursor to the Edit IP/Bridge field, press [SPACE BAR] to selectYes, then press [ENTER] to display Menu 11.3 – Remote Node NetworkLayer Options.Figure 25 Menu 11.3 – Remote Node Network Layer OptionsTable 19 explains fields in Figure 25.Menu 11.3 - Remote Node Network Layer OptionsIP Options: Bridge Options:IP Address Assignment = Dynamic Ethernet Addr Timeout(min)=Rem IP Addr = 0.0.0.0Rem Subnet Mask= 0.0.0.0My WAN Addr= N/ANAT= SUA OnlyAddress Mapping Set= N/AMetric= 2Private= NoRIP Direction= NoneVersion= RIP-1Multicast= NoneEnter here to CONFIRM or ESC to CANCEL:Table 19 Menu 11.3 Remote Node Network Layer OptionsField Description ExampleIP AddressAssignmentPress [SPACE BAR] and then [ENTER] to selectDynamic if the remote node is using a dynamicallyassigned IP address or Static if it is using a static (fixed)IP address. You will only be able to configure this in theISP node (also the one you configure in menu 4),all othernodes are set to Static.DynamicRem IP Addr This is the IP address you entered in the previous menu.Rem SubnetMaskType the subnet mask assigned to the remote node.
