Telephone settings201• If you enter a Mandown text message (up to 160 characters inlength), the handset sends that message to the configured number.Note 1: If you want to cancel the Mandown condition, you mustdeliberately clear it; the handset does not automatically cancel theMandown condition if you return the handset to its vertical position.Note 2: You can configure the LED indicator to flash when theMandown condition is detected. If you manually clear the mandowncondition before the prealarm time elapses, the LED indicator turnsoff; otherwise the LED indicator continues to flash until the handsetplaces the mandown call or message. See “Configuring the LEDIndicator (4075 only)” (page 158) for more details.Note 3: The Mandown feature is separate from the Emergency Callfeature, and you must configure it separately.Activating or deactivating MandownTo activate or deactivate the Mandown feature, perform the followingsteps:Attention: You can configure Mandown to send text messagesonly if your system supports this feature. Contactyour system administrator to determine if you can usethis feature. After you send a message, the handsetstores the message in the text message list. Formore information, see “Messaging” (page 106).CAUTIONThe Mandown feature only functions when the handset isin idle mode. If the handset is in any other mode (forexample, if you are in a call) the Mandown feature isunavailable.1. Open the Calls menu using the steps in “Accessingthe call settings menu” (page 188).
