Handset accessories223You must remove the battery pack before you can remove or install theMEM card. Reinstall the battery pack after you remove or install the MEMcard. The MEM card tray is under the battery pack on the back of thehandset.Extracting the MEM card from the frameTo install the MEM card into the handset, you must extract it from theframe.To extract the MEM card from the frame, perform the following step:1. Remove the MEM card from the frame as shown in the followingfigure.Figure 25: Extracting the MEM card from the frameInstalling the MEM cardTo install the MEM card in the handset, perform the following steps:1. Place the handset face down on a flat surface.2. Remove the battery compartment cover and the battery.Note: For information about removing the DECT 4027 or 4070handset battery compartment cover, see “Installing the battery pack(4027 and 4070 only)” (page 18).Attention: A new MEM card is delivered in a larger frame; use thefollowing procedure to remove it from the frame before youinstall it into the handset.Attention: When you remove the MEM card from the frame, do nottouch the metal contacts.
