15Installing the Nortel Ethernet RoutingSwitchThis section provides the information and procedures to install the NortelEthernet Routing Switch 4500 Series. Unless otherwise noted, tasks in thissection apply to all switches in this series.This section contains the following topics:• "Electrostatic discharge" (page 16)• " Environmental requirements" (page 17)• " Package contents" (page 18)• " Installing the Nortel Ethernet Routing Switch 4500 Series on a tableor shelf" (page 19)• " Installing the Nortel Ethernet Routing Switch 4500 Series in anequipment rack" (page 21)• " Cabling requirements for the Nortel Ethernet Routing Switch 4500Series" (page 23)• "Installation and removal of SFP transceivers" (page 23)• "RJ45 connector pin assignments" (page 25)• "Console port pin assignments" (page 28)• " Universal Serial Bus (USB) ports" (page 29)• "Power specifications for the Nortel Ethernet Routing Switch 4500Series" (page 29)• "Connecting AC power" (page 31)• "Checking LEDs on the Nortel Ethernet Routing Switch 4500 Series"(page 33)• "Setting IP parameters for the Nortel Ethernet Routing Switch 4500Series" (page 38)• "Nortel Ethernet Routing Switch 4500 series stacking" (page 44)• "Stacking configurations" (page 49)Nortel Ethernet Routing Switch 4500 SeriesInstallation GuideNN47205-300 02.01 Standard5.0 23 February 2007Copyright © 2007, Nortel Networks Nortel Networks Confidential.
