Nortel 4500 Series Installation Manual

Also see for 4500 Series: Cli manual Overview-System Configuration Installation

Contents

Nortel 4500 Series Installation Manual Manual pdf 17 page image

Environmental requirements 17To install the ESD discharge cable, perform the following procedure.Step Action1 Connect the ground lug on the ESD discharge cable to a safe andsuitable earth ground.2 Briefly connect all RJ-45 cable connectors to the female RJ-45connector of the ESD discharge cable, and then connect each RJ-45cable connector to the switch.3 Leave cables connected to the networking equipment. After youconnect cables to networking equipment, the cables do not buildup charge.—End—Environmental requirements" Nortel Ethernet Routing Switch 4500 Series environmental requirements"(page 17) provides the environmental requirements for the individualswitches in this series. Ensure that the area where you install the switchand where it will operate meets these requirements.Nortel Ethernet Routing Switch 4500 Series environmental requirementsEnvironmentalrequirementNortel Ethernet Routing Switch 4500 SeriesAll modelsAmbient Temperature 0C to 50C, continuous operationOperating Temperature 0C to 50CStorage Temperature -40C to 85COperating Humidity 0 to 95 percent non-condensingOperating RelativeHumidity10 to 90 percent non-condensingStorage RelativeHumidity10 to 90 percent non-condensingMaximum OperatingAltitude10 000 feet above sea levelAltitude 0 to 10 000 feet above sea levelStorage Altitude -1 000 to 40 000 feet above sea levelNortel Ethernet Routing Switch 4500 SeriesInstallation GuideNN47205-300 02.01 Standard5.0 23 February 2007Copyright © 2007, Nortel Networks Nortel Networks Confidential.